Professional production of socket manufacturers briefly socket installation matters needing attention

　　Professional production of socketThe manufacturer warmly reminds that although the switch socket is not a' big it' like household appliances, it is related to the daily safety of the family and is the first line of defense to ensure the safety of household electricity. Therefore, one must not be careless when selecting the switch socket. Electrical experts specially remind that different places are equipped with different types of switches and sockets. For families with children, in order to prevent children from touching the socket hole with their fingers or metal objects, safety sockets with safety shields should be selected.

Socket connection method is how? Professional production of socket manufacturers to introduce for you!

1. First use the electroprobe to find out the live wire. 2. Turn off the power of the socket. 3. Mark one A of the two holes of the live wire access switch, and then connect a 2.5MM2 insulated wire from the other hole to the L hole of the three holes of the socket below and firmly connect it. 4. Find out the neutral wire and connect it directly to the N hole in the socket 3 holes and tighten it. 5. Find out that the ground wire is directly connected to the E hole of the 3 holes of the socket and tighten it. Note: The zero and ground wires cannot be connected incorrectly (generally facing the left zero and right fire of the socket to be grounded), otherwise the electrical equipment will be plugged in and tripped upon opening.

socket selection pay attention to what?Professional production of socketThe manufacturer introduces you!

1. The power socket shall be the product that has passed the inspection by the relevant national product quality supervision department. 2. The power socket at home should be safe, and splash-proof sockets should be used in damp places such as toilets. 3. The rated current of the power socket should be greater than 1.25 times the rated current of the known equipment. The rated current of the general single-phase power socket is 10A, and the rated current of the special power socket is 16A. The distribution line and power connection mode of the special high-power household appliances should be selected according to the actual capacity. 4. In order to facilitate plugging and unplugging, the number of combined sockets should be two, and the maximum number (including switches) should not exceed three. 5. For household appliances that are in danger of electric shock when plugged in, a socket with a switch to disconnect the power supply should be used. 6. In wet places, the waterproof shell should be installed at the same time when installing the socket.

socket installation pay attention to what?Professional production of socketThe manufacturer introduces you!

1. When the design is specified, the installation height of the socket shall be installed according to the design requirements; When the design is unclear, it should generally conform to the following: the socket with safety door should not be less than 0.3M and the socket without safety door should not be less than 1.8M. It is recommended to buy the socket with safety door as much as possible, because the price difference between the two is not big.

2. Toilet or other wet places should use a well-sealed waterproof splash-proof socket. (Note: For the socket with safety door, the plastic baffle (safety door) in front of the metal reed of the socket is added on the basis of the general socket. For the three-hole socket, when the plug is inserted, the grounding pile head (slightly longer) is inserted into the hole first, and the other two hole doors are opened only when the mechanism in the socket acts. The two-hole sockets must be inserted into the socket pile head at the same time, and the safety door can be opened, so as to prevent safety accident.)

3. When the socket is installed, its panel should be correct and close to the wall. Moreover, the wiring (phase) should conform to: single-phase two-hole socket, the right hole or upper hole facing the socket is connected to phase line (live wire), and the left hole or lower hole is connected to zero line; Single-phase three-hole socket, the right hole facing the socket is connected to phase line (L, live wire), the left hole is connected to neutral line (N), and the upper hole grounding line (PE).