Key switch manufacturers: touch switch and mechanical switch comparison

We want to buy a switch manufacturer's switch technology, we can find that we can dazzle the variety, not to mention many models, at present we would like to know is the switch manufacturer's touch switch and mechanical equipment switch who is good.

　　Key switch manufacturersThe touch switch is a small magnetic induction control system, the touch switch is the pedal physical operation, the same level is similar, the current stage of touch switch sales market share is larger, after a long time will completely replace the button type.

　　Key switch manufacturersThe touch switch is a click-type electronic switch. The general schedule is less. When you press it, it will be connected, when you relax it, it will be disconnected. Mechanical switch, the general volume stroke is relatively large, the current withstand voltage is relatively large. The mechanical equipment touch switch can also be made into a self-locking switch, that is, when you press the button to turn on normally, it will turn off.

The tact switch uses short contacts as the circuit of electronic devices to complete the work and termination of the power module circuit of our entire system. The tact switch of mechanical and technical equipment has built-in locking, which can maintain long-on and long-off at the same time, thus completing the work and termination of the entire working power supply circuit.

The difference between the optical touch switch and the mechanical device switch is that the actual operation and management methods of the optical touch switch and the mechanical device switch are similar, and the travel time arrangement of the two is different, and the travel of the mechanical control switch is longer than the travel of the optical touch switch. Light press indicates the amount of energy that the power switch technology is applied to the actual operating system of the enterprise. The condition of the power switch contact of the key switch manufacturer can be changed without consuming too much energy and contact. Only China can maintain the original development status after power failure. The built-in lock of the light switch can effectively maintain long-on and long-off. According to the electromechanical equipment of the student power switch itself, the conduction of the power circuit is locked.

The above is for you to bringKey switch manufacturers"Tact switch and mechanical switch comparison", I hope to help you. There is no good or bad, but we see that different product developments need to be applied to different switches, so teachers should give due consideration.

Although it is said that the touch switch of the key manufacturer looks very cool and is very convenient to use, many people may still be not used to the actual operation of the touch switch of the built product directly, so that power switches with different specifications and models cannot be used randomly, so as to prevent the rear camera from easily causing damage once the selected power switch is unavailable. And the use of this power switch for the existing key points of the problem is also very many, a careless actual operation or incorrect use, will also lead to common failure problems.