Patch-type push button switch PB-22E60C

Rated value: DC12V 0.2A. Operating environment: -16° to +60°. 1. Electrical performance: (1) Contact resistance: 50mΩ. Testing method: Test at 1KHz with a small current (below 100mA). Requirement: below 50mΩ. (2) Insulation resistance: 100MΩ at DC250V for 1 minute. Testing method: Apply 250VDC voltage for 1 minute, testing according to the following contact methods: between pins and between pins and housing. Requirement: above 100MΩ. (3) Dielectric strength: AC250V for 1 minute. Testing method: Apply AC250V (50-60Hz) voltage for 1 minute with a sensitivity current of 0.5mA, testing according to the following contact methods: between pins and between pins and housing. Requirement: no insulation breakdown. 2. Mechanical performance: (1) Operating force: 200±50gf. Testing method: Push the rubber handle in the direction of operation until it is close to the bottom. (2) Terminal strength: 100gf for 15 seconds. Testing method: Apply 100gf force in any direction at the front end of the pins for 15 seconds. Requirement: No cracks, looseness, or other abnormalities in the terminals, meeting mechanical and electrical performance. 3. Durability: (1) Lifespan: 10,000 times. (2) Solderability: 240°C±5°C. (3) Solder resistance: Hand soldering: 360°C; Reflow soldering: 260°C. (4) Cold resistance test: -25±5°C. (5) Heat resistance test: 70°C±2°C. (6) Humidity test: 90%-95%. Dongguan direct key switch manufacturer produces and wholesales SMT 5.8*5.8 self-locking non-locking reset button direct key switch PB-22E60C.